Guide :Music : Mini Kp Kaoss Pad
Connection problem I have a DJM600 mixer, 2X SL1210's running through channels 3 & 4 with 2x CDJ1000 Mk3's attached to channels 1 & 2 - all working fine. Just purchased a Kaoss pad 3, linked it through the send and return 1/4 jacks on the mixer to the send and return phono connections on the Kp3. Can not get the effects to run over the master??. Kp3 is recieving a signal as the 'peak' meter will pass from green to orange to red when turning up the gain on the Kp3, just no effect applied on the out-field. I have tried with the effects dial on the mixer set too send/return and channel select on the mixer set to master and all conbinations in-between..still no joy..... at all!!! Best i've had (un-able to remember the settings at the time) was the out field playing (including Kp3 selected effect) only when i was touching the pad on the Kp3 (leaving no sound when removing my finger). Now am reduced to filling out and posting help emails, too people i dont even know - while drinking cans of beer. Not quite the way i had planned, but i have beer i surpose.... it's not all bad......... Any help (at all) lovingly taken........or it's sledge hammer time!!!
Dec 24, 2008